Below are the available bulk discount rates for each individual item when you purchase a certain amount
For the warmest, driest doghouse around, consider the Dog Den 2 with a wall-mounted Hound Heater Pet House Furnace. If you would like to purchase this product without the heater, please visit our Dog Den 2 product page. Our customers and their dogs love our dog dens and kennel doors
Save $15 when you order the Hound Heater and Dog Den 2 together! Discount/savings is already reflected in the price that is listed.
Well-made Dog Den, good for dogs up to 110 pounds.
Guaranteed Insulation: Our Dog Den 2 has over one-fourth more insulating foam built into the ceiling and floor of every doghouse. It is better than any commercial doghouse available on the market today and kennel owners and gun dog/bird dog owners agree. Our design uses a full inch of foam in the ceiling, and the wall and floor each have ¾" of foam built in. This heavy-duty doghouse will keep your dog dry, warm, and comfortable wherever you live.
Hound Heater: The Hound Heater Pet House Furnace can dramatically warm the temperature inside the Dog Den up to 70 degrees. This wall-mounted heater costs an additional $99.95 (included in the product price shown above) and will keep your dog warm and comfortable in the coldest climate areas. When the wall-mounted heater is installed properly, it is safe for pets. The 150-watt Hound Heater comes with a one-year manufacturer’s guarantee. The heater is easy to install with a Dog Den ordered with K-9 Kondo. We will predrill the mounting holds and provide easy-to-use attachment hardware.
Exterior Wall is UV-Protected: The UV-protected extreior wall and interior vinyl wall are washable which makes them easy to disinfect and clean.
Washable Detachable Lid: The doghouse lid detaches easily which makes cleaning a breeze. Changing bedding is easy and convenient.
Well-Made and Chew-Proof: The commercial-grade materials used in the Dog Den and dog flap are chew-proof.
Dog Den 2 Size: The regular Dog Den measures 34" long x 22" wide x 22" high.
Thick Door Lip: The door lip is 4.5" high. This ensures that your dog bedding stays where it belongs.
Heavy-Duty Dog Flap “Kennel Door”: The heavy-duty kennel door is unique in that it swings both ways. It also locks in the open position to enable ventilation in the summer. This durable dog flap is designed to be water-proof, wind-resistant, and chew-proof.
Tough and Lightweight: This heavy-duty doghouse is made of high-quality commercial-grade materials and only weighs 55 pounds.
Easy Assembly: The Dog Den 2 comes 90% factory assembled and requires less than 30 minutes for completion using common household tools.
5-Year Guarantee: Check out our five-year limited warranty that guarantees replacement for any part due to chewing or failure.
2 x 4 supports not included.
Posted by Unknown on 12th Feb 2013
I loooove this k-9 condo. I have 2 pitbull/bullies who ate 2 wooden dog houses..I don't mean bit and chewed them..I MEAN ATE THEM! I don't see a dent nor teeth marks or anything of the sorts on my K-9 condo. It keeps them warm in 40 degree weather. One of them is full grown and weighs about 80llbs the other is a puppy but she is the height of a full grown dog and weighs about 50-60lbs and they both sleep in the same house ( I bought the largest one they have). They refuse to be separated so they make it work. But right after I type this I am buying another one and hope they will each go in their own condo. THIS IS THE BEST HOUSE for dogs that chew, bite etc. Worth every single penny. Putting it together was tough tho. Took 2 of my guys, myself, the video that comes with it and 5 hours to finally get together. But once put together you will love it. At first my dogs were scared of the dog door/entrance but after an hour or 2 they made their way in. I keep the the doggy door pinned up so that they never have to push it open to go in or out. I think it's better that way so they are not so confined like a prison. LOL
Posted by Kathy winner on 27th Jan 2013
I still think that my k9 condos may be too small for my labs. I have confirmation dogs that weight 70-75 lbs. I haven't seem them use up the condo yes in their dog run but I'm sure they will when they need to
One dog (puppy) chewed the wires from the back of the condo the 1st day. We had to secure it to a platform to avoid them from moving the house to expose the wires.
(K-9 Kondo Response) The K-9 Kondo is our barrel style unit whereas you have a Dog Den 2. The customer is the ultimate judge as to the size of the shelter for their dog but the dog is one who has to live in it. Like so many dog owners we think in human terms when we select shelter for our pets. Bigger is not better. The largest of labs (120 pounds) can curl up in a two foot square. Shelter which allows a dog to enter, turn, and curl up is all the space that is needed. Anything larger is wasted space that the dog must heat. See this link for more information.
From our Heater FAQ page:
Q. Is the electrical cord protected from dog chewing?
A. No. The cord passes through the back wall of the Dog Den. The Dog Den should be positioned in such a way that the cord is not accessible to the dog.
Posted by Wall Canyon Kennels on 26th Nov 2012
Doggies love it!
Posted by Dave Kinser on 15th Nov 2012
I have two Dog Den 2s with Hound Heaters and one Dog Den 3 with Hound Heater. My hunting partner has two Dog Den 2s with Hound Heaters. We are 100% satisfied! These units are truly chew-proof and well insulated. Our oldest Dog Dens are 7 years old and are still in great shape. We would strongly recommend these dog houses to friends.
Posted by Unknown on 24th Oct 2012
The condo was very easy to put together, but the door took a lot of adjusting to get it to swing freely. It's the third I have purchased, they work great.
I bought this product because it said made in the USA. Even bragged to my friends about supporting US jobs. To my dismay, the heater that came with it had made in China stamped all over it. Had I known, I would not of bought the heater.
Find a US supplier and keep our folks working
K-9 Kondo response:
Finding a US supplier for a product like the Hound Heater would be great. The problem is that there are none. The fellow who sells the Hound Heater approached more than a dozen American manufactures about producing the unit. Only one of the manufacturers even bothered to reply. The one price quoted to produce the Hound Heater was well over $100.00 wholesale. With the projected cost of production, packaging, insurance, etc. the Hound Heater in it's current form would be priced at over $200.00. How many people would buy a dog house heater for $200.00 or more? The fellow who owns the heater company is a very good guy. I have found him to be honest and he made things right when a couple of units were deficient. As much as he would like to produce them here he just can't do it and compete in the market place.
I am very fortunate to be able to manufacture my products in my own facility. The steel comes from US sources only and the plastic is made by a recycling company only 100 miles from my factory.
I apologize for not pointing out that the heater is imported by an American company. My web site will soon indicate that the product is not of US origin. Thanks for being a customer and for pointing out your concerns.
Joe Shown, K-9 Kondo Inc.